EU Standard - Automatic 3-ends Crimping and Double Head Insertion Machine - JMK

Product Introduction:

The whole machine adopts European standard design, strictly follows the European standard mechanical safety standards, and is equipped with fully enclosed safety cover, emergency stop button and photoelectric induction safety door in various directions, so as to ensure the personal safety of operators and the production process. It is equipped with three terminal crimping machines, which can complete a variety of different types of terminals crimping connector, furnished with high-speed and high-resolution CCD visual inspection and crimp monitoring system, as well as connector pull detection to ensure the stability of the connector, whole process quality monitoring, and automatic sorting of bad products. (Cycle speed: about 2 seconds per line)

Technical Parameter：

Model	JM-600
Capability	Wire cutting, tare at both ends, pressing at both ends, inserting at one end, inserting at both ends, holding the wire in the reverse direction, discharging the good/bad product separately, and discharging automatically.
Cable size	AWG#18-#30(Wire O.D. Ф2.5mm below)
Cable color	Three Color
Cutting length accuracy	± 0.5% of wire length.
Tare length	0mm-5mm
Tare length accuracy	Tolerance ± 0.1 mm
Cutting length accuracy	Maximum adjustment of 2mm (manual adjustment ± 0.05mm)
Crimper	0.8t servo pressing machine 3 units
Universal crimper	Special S600 press (waste cutting type)
Inspection device	Low pressure, wire presence detection, wire overload detection, crimp error detection, terminal presence detection, terminal overload detection, terminal insertion detection, wire conduction, pressure sensing device, CDD visual inspection, and so on.
Control method	PLC control
Power supply	3-Phase AC 380
Compressed air	0.5MPa, about 170N/min
Action temperature range	5°C - inner 50°C
Action humidity range	30%-80%RH No condensation
Warranty time	One year (excluding consumables)
Machine dimensions	5500Wx5500Dx1850H (Includes wire release frame, no protrusions.)
Mechanical Weight	Approx. 2200kg + 100kg (payoff frame)

JMK Intelligent CFM Crimp Monitoring System

Sample harness (supports non-standard customization)